Product image is only a representation, actual product appearance may differ slightly
The BS-330SA semi-automatic bandsaw from Baileigh Industrial is based on the BS-330M. The BS-330SA uses an industrial-grade hydraulic system to clamp the vice, lower the head, and to return the head after cutting. This system greatly improves productivity.
The blade is powered by a 3hp (2.24 kw) motor that runs on 400 volt, 50hz, three phase power for the best reliability on the market. The blade speed on the BS-330SA is variable form 82fpm to 270fpm. This allows the operator to set the blade to run at the perfect speed for the material being cut. With its maximum capacity of 330mm OD (13”) round and up to 330mm x 470mm (13" x 18.5") rectangle when stood upright, the BS-330SA will handle just about any task. A large 1.25” blade runs through tungsten carbide blade guides for a more precise cut, both are standard issue on the BS-330SA.
The BS-330SA semi-automatic bandsaw features a mitering head that can go to 45°. Like most bandsaws from Baileigh Industrial, the mitering head and bow are made from heavy-duty cast iron to reduce vibrations during the cutting process. A laser guide, and large capacity flood coolant system round out the list of impressive features on this bandsaw.
Contact Baileigh Industrial on +44(0)2476 619 267 for more information.
|Country of Manufacture||Taiwan|
|Miter Adjustment||Swivel Head and Vise|
|Miter Angle||1 – 45°|
|Capacity Rectangular 90° x 45°||330 x 480 x 279 x 255 mm|
|Capacity Round 90° x 45°||330 mm x 225 mm|
|Capacity Square 90° x 45°||330 mm x 225 mm|
|Table Height||775 mm|
|Blade Guide||Carbide x Roller|
|Blade Speed (fpm)||25 - 82 mpm|
|Descent Control||Pressure Assist Hydraulic|
|Drive||Belt x Pulley|
|Power||415V, 50Hz, 3-Phase|
|Shipping Weights||820 kgs.|
|Shipping Dimensions||2286 x 940 x 1549 mm|
* specifications subject to change without notice.