Product image is only a representation, actual product appearance may differ slightly
The BS-330M manual bandsaw will provide years of trouble free use in any environment. The BS-330M has a maximum capacity of 13” OD round, but can cut up to 330mm x 470mm rectangle when stood upright.
The blade speed on the BS-330M is variable from 82fpm to 270fpm. This allows the operator to set the speed perfectly for the material being cut. The 3hp motor is powered by 400 volt, 50hz, three phase power for more reliability and efficiency over single phase.
The BS-330M bandsaw features a mitering head that can go to 45°. Like most bandsaws from Baileigh Industrial, the mitering head and bow are made from heavy-duty cast iron to reduce vibrations during the cutting process. A large 32mm (1.25”) blade runs through tungsten carbide blade guides for a more precise cut.
Operation of the BS-330M manual bandsaw is also very easy and features a hydraulic descent feature for larger production runs that increases blade life and reduces operator fatigue. The blade will also stop running when the saw gets to the bottom of the cut to promote safety.
|Country of Manufacture||Taiwan|
|Miter Adjustment||Swivel Head and Vise|
|Miter Angle||1 – 45°|
|Capacity Rectangular 90° x 45°||330 x 480 x 279 x 255 mm|
|Capacity Round 90° x 45°||330 mm x 225 mm|
|Capacity Square 90° x 45°||330 mm x 225 mm|
|Table Height||775 mm|
|Blade Guide||Carbide x Roller|
|Blade Speed (fpm)||82–271|
|Drive||Belt x Pulley|
|Power||415V, 50Hz, 3-Phase|
|Shipping Weights||830 kgs.|
|Shipping Dimensions||2286 x 940 x 1549 mm|
* specifications subject to change without notice.