Product image is only a representation, actual product appearance may differ slightly
This heavy-duty press is built using only the best quality components and craftsmanship. A fully welded 3/8” plate steel frame will take more than the 66 tons that the industrial-grade hydraulic system can throw at it.
Weighing is at just over 685kgs, you know that this press is made to last.
The robust 2hp, 400 volt, three phase motor has two working speeds; a rapid descent speed and a slow approach speed. There is also an option for the operator to use a hand pump for even more control. Once the job is done, the HSP-66M H-frame press has an automatic cylinder return.
The table on the HSP-66M is nothing short of remarkable. Fabricated to exacting tolerances, the table features two support pins that are 2” in diameter and allow the table to be locked in at the correct working height.
The HSP-66M also includes lifting chains to help with the placement of the table.
Other features of the HSP-66M H-frame press include a pressure regulator, ram cap, chrome piston, head screw, and a cylinder that is moveable left or right within the framework itself.
Contact Baileigh Industrial today for more information.
|Country of Manufacture||Poland|
|Return Speed||12.7 mm / sec.|
|Maximum Pressure||235 bar|
|Piston Head Diameter||80mm|
|Pump Speed||.871 / 3.619 / gal/min.|
|Oil Capacity||30 liters|
|Working Width||750 mm|
|System Oil Capacity||8 liters|
|Lowering Speed||9.19 mm / sec|
|Maximum Capacity||60 ton|
|Cylinder Stroke||400 mm|
|Cylinder Diameter||210 mm|
|Power||415V, 50Hz, 3-Phase|
|Shipping Weights||685 kgs.|
|Shipping Dimensions||1150 x 900 x 2170 mm|
* specifications subject to change without notice.